Editorial Reviews:
Synopsis
CONSTRUCTION The inner and outer skins are one piece moulded polyethylene with no joins or projections. They are bonded together by rigid insulation foam with a thickness of approximately 60mm.
INSULATION The insulation used is the best available for this purpose and is injected under controlled temperature and pressure, creating perfect lamination and bond of both inner and outer skins. This insulation has been formulated and tested under extreme conditions.
LID The lid is a minimum of 51mm thick, filled with insulation and capable of being used as a seat. Where a hinge is fitted the lid will rest in an open position 5 degrees past the vertical without straps. .
HANDLES Moulded in Nylon or built in to the product.
HINGES Some of our products have loose lids for simplicity and functionality. Our standard and premium ranges offer hinges moulded in Nylon.
LATCHES Where fitted our rubber latches maintain constant pressure on the lid producing a perfect seal. Locks can be used where security is an issue.
CORNERS The feet are moulded in nylon and give protection to the corners and the sides of the ice box.
DRAIN PLUG This is moulded and does not leak. It is threaded on the outside, giving clean through drainage using a moulded tube on the inside.
SEALING FOAM The sealing foam which is between 24 and 40mm thick is approved for food handling. (FDA)
HYGIENE The inside and outside skins are moulded, glass smooth and do not absorb tastes or smells. This makes cleaning efficient and easy. There are no screws, joints or attachments - giving a one piece moulded interior surface.
